Tempest
Astrodyne TDI is a leading provider of TEMPEST EMI filters. Electronic equipment such as computers and other peripherals can leak sensitive information over conducted and radiated electromagnetic emanations. These signals transmitted down an unprotected telephone or a power line can potentially be intercepted by an enemy or a competitor over the same telephone or power cable many miles away. TEMPEST filters stop the high-frequency EM signals (or noise) emanating inside the secure environment so they can’t travel outside the room/ facility overpower or communication cables.
| Part Number | Description | Part ID | Current Rating | Maximum Operating Voltage | Input Terminals | Output Terminals |
|---|---|---|---|---|---|---|
|
RPT5000-10-S | TEMPEST/COTS DC EMI Power Line Filter | 1310-002 | 10.00 | 400VDC | |
+ Show More | ||||||
|
RPT5000-15-S | TEMPEST/COTS DC EMI Power Line Filter | 15.00 | 400VDC | ||
+ Show More | ||||||
|
|
RPT5000-25-S | TEMPEST/COTS DC EMI Power Line Filter | 1310-003 | 25.00 | 400VDC | |
+ Show More | ||||||
|
|
RPT5000-35-S | TEMPEST/COTS DC EMI Power Line Filter | 1310-004 | 35.00 | 400VDC | |
+ Show More | ||||||
|
|
RPT5000-5-S | TEMPEST/COTS DC EMI Power Line Filter | 1310-001 | 2.00 | 400VDC | |
+ Show More | ||||||
|
RPT5500-10-S | TEMPEST/COTS AC EMI Power Line Filter | 1311-001 | 10.00 | 300VAC | |
+ Show More | ||||||
|
|
RPT5500-15-S | TEMPEST/COTS AC EMI Power Line Filter | 1311-006 | 15.00 | 300VAC | |
+ Show More | ||||||
|
|
RPT5500-25-S | TEMPEST/COTS AC EMI Power Line Filter | 1311-002 | 25.00 | 300VAC | |
+ Show More | ||||||
|
|
RPT5500-30-S | TEMPEST/COTS AC EMI Power Line Filter | 1311-005 | 30.00 | 300VAC | |
+ Show More | ||||||
|
|
RPT5500-35-S | TEMPEST/COTS AC EMI Power Line Filter | 1311-007 | 35.00 | 300VAC | |
+ Show More |
It’s an accepted industry standard to use filters that provide high insertion loss across the board range of frequencies, such as 60dB or 80dB or 100dB from 14KHz or 100KHz to 10GHz. In certain cases cut off frequency goes further down.
Astrodyne offers a wide range of EMI/ RFI/ EMC filters that help our customers meet RED/Black separation requirements. We offer TEMPEST filters that provide 100dB insertion loss from 14kHz to 10GHz. Other TEMPEST filters series provide a minimum 60dB insertion loss from 100kHz to 1GHz for the secondary level of TEMPEST protection on individual equipment.
In addition to the TEMPEST filters listed below, all of our shielded room filters and communication filters provide TEMPEST level EMI performance and can be used in those applications.