SPU130 Power Supplies – Switch Mode 130w 130 Watt

130 Watt Desktop Switching Power Adapters

  • Universal 85-265VAC Input
  • 3.3 to 48 VDC Outputs
  • Regulated, Single & Dual Outputs
  • 3000V Isolation
  • IEC320-C14 Input Inlet

Model NumberMin. LoadOutput VoltageOutput AmpsLoad Regulation
SPU130-200(M)4/0A3.3/1220/2 max.7/5% max.
SPU130-201(M)4/0A5/1220/2 max.7/5% max.
SPU130-202(M)4/0A5/1520/2 max.7/5% max.
SPU130-203(M)4/0A5/2420/2 max.7/5% max.

SPU130 series

Input Specifications

Input Voltage Range 85-265VAC
Frequency Range 47-63 Hz
Inrush Current Low Line 30A max., 15A typ. / High Line 60A max., 30A typ.
Input Current Low Line 3.2A / High Line 1.7A
Leakage Current 0.5-0.75mA
Power Factor Correction 0.95 min. 0.99 max.
Min. Load 0A

General Specifications

Isolation 3000VAC
Isolation Input-Ground 1500VAC
Insulation Resistance 50 Mohm
Efficiency 80-85% typ.
Switching Frequency 54.5 KHz
Safety Approvals cUL60950-1, EN60950

Physical Specifications

Size (Inches) 7.7″x3.46″x2.0″
Construction Desktop Style
Weight (g) 860g
Weight (oz) 30.33

Environmental Specifications

Operating Temperature 0 to +70°C w. Derate See Curve
EMC Vin = 220VAC CISPR-22 B / Vin = 110VAC FCC Part 15B
Storage Temperature -40 to +85°C
Working Humidity 5 to + 95%, non-cond
MTBF 100,000 Hrs

Output Specifications

Output Voltage 3.3
Output Amps 27.27
Load Regulation 7%
Line Regulation ± 1%, max. ± 0.5% typ. (@ FL)
Temperature Coefficient ±0.04%/°C, typ
Ripple and Noise 1% Pk-Pk, typ (2% Max.)
Over Voltage Protection 112-132% (O/P 1 only)
Over Current Protection 110-150% of Rated Current
Transient Response 4mS 50%-100% Load
Start Up, Rise Time 0.3/1/2 Seconds
Hold Up Time 75-85mS at 110VAC Input


All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

2015 © Astrodyne TDI Power Supplies & EMI Filters | Sitemap | Privacy Policy